nicole-

i would love it if you could email me a copy of the safety card you used.  thank you.  nashondupuy@yahoo.com   

hello my name is tinh hoang.  I have been  a forklift driver for 15 years, but have lost my certification  I would like to know if someone can give me advice to how to get a new certification and where i can get the right advice to get this information.  Please contact me a.s.a.p. at trangh4022000ster@gmail.com

Sincerely,

Tinh Hoang

Hi. just a little tidbit concering forklift and certifications. The only one who 'really' certifies any John/Jane Doe to operate a forklift at that particular facility is the Employer. Classes taken elsewhere are good, but they do not take the place of the Employer certifying that John/Jane Doe is certified to operate said forklift at that facility. And one more thing, all forklifts are not the same, so said employer must be trained in all of the different forklifts on site. Personally, I think this is a good thing as location conditions vary as well as type, model, make etc. of different forklifts.

Dave Drury
NY Rescue Tech

I would have to agree with your reply Dave. The agency would not want to go down that road, and competency is not necessarily limited by physical handicaps.
Dave Drury
NY Rescue Tech

To be most effective, all forklift/forktruck certification training should be performed onsite using the exact rolling stock that is being used at a particular facility. "Train as you Operate". Initially, you can bring in a reputable outside agency who have very good credentials to train management to safely operate their own rolling stock or to "Train the Trainer". They will provide you with timelines for reviewing your forklift certifications/retraining/refresher courses. After performing an analysis of your rolling stock, the agency will put together a training outline for you to do your subordinate training.  Have them copy the training outline on disk so you can edit the program later when you purchase different lifts, etc. I have done this with our facility, It works very well and you are covered. Do a Google for "Onsite forklift training, your city, your state" or something relavent to that to find an agency in your area. Hope this helps.

cando42

hello,

This is exactly what I have been looking for. Could you please email a copy of your card to  joeyglassunicon@windstream.net

Hello,

Could you pleae send me a copy of the forklift certificate?  email me at everble1@aol.com

 

Thanks

Eric

Greetings Nicole.  This is Diane Malachowski of the OSHA Training Institute Education Center, Region 1.  Can you please e-mail me the fork lift training verification card you have created (minus your logo and company information).  My e-mail is:  dmalachowski@keene.edu

 

Thank you.  Instructions on using your Publisher and Microsoft Access is also helpful.

hi nicole can you please email me the fork lift training card. ( orthotech80@yahoo.com) i am also looking for a place to get scaffolding cards. can you help me out please. thank you so much...

Joey,

Did you recieve a copy of the card?  If so, could you sent me a copy?  I don't know who you got it from so I am going thru you.  I have an audit Monday and we are out of luck on this.  If anyone else reads this and has something to send me that would be great.  I'm kind of in a spot.

peter@hydroster.net

 

Thanks,

Peter

hi nicole

i would highly appreciate it if you could send me a copy of the forklift certification card through my email at robertblue1024@yahoo.com,  thx again

Hi Nicole,

Could you please send me a copy of the forklift certification card to my email at dbell@imch.com. This is such a great idea. We never have enough cards. Our current program does not sell the cards alone, you have to buy the whole book just to get the card. We have plenty of books.

Thanks, Dawn

Hi Nicole,

Could you send me a copy of the card at dbell@imch.com  Sorry for the 2nd post, I think my last post was sent to the wrong person.    Thanks, Dawn

 

can i get a copy of the forklift certificate please? it's urgent <set_tings@yahoo.com> thank you so much, otherwise i'll be out of work,  mine gone missing last year, now my employer is goin to perform an inspection on monday. i've got family to feed. thank u so much once again. i'll have to take this chance.

Hi could you send me your forklift cert card minus your co logo?I lost mine sw.Thanks John Trent, my email is wolfhart03@hotmail.com  or you could send it to me      at     John Trent ,PO Box 192, Bagley,mn.    56621